Hongya Power Generating Equipment To Utilities Limited
tailored solutions to meet the customers requirements
Add to Cart
Horizontal 4000kw Hydro Electric Power System For Hydro Power Plant
overview
vertical Pelton turbine with single runner and double nozzle. It consists of main machine, nozzle apparatus, inlet part, deflector regulating apparatus, reverse nozzle mechanic, etc.
a. Rotary part: including runner, water throw ring, etc. The runner is the heart of turbine. The properties of the runner are critical for the properties of the turbine. This runner is cast by stainless steel. The shape of bucket is like two half-spoon, there is a water dividing edge in the middle. The water dividing edge divide the water flow jetted to the bucket to two sides in order to reduce water collision lost.
There is a notch on the top of the bucket to avoid the bucket hamper the flow impulse
the following bucket. The water throw ring can stop the water overflow along shaft.
b. Machine house including house and cover. The house connects the main part in a whole. One of the bearings for deflector shaft is located on a truncated cone hole near the connection between the house and the distributor. Connect the cover and house by screws and put asbestos pad between them.
A hydraulic turbine converts the energy of flowing water into mechanical energy. A hydroelectric generator converts this mechanical energy into electricity. The operation of a generator is based on the principles discovered by Faraday. He found that when a magnet is moved past a conductor, it causes electricity to flow. In a large generator, electromagnets are made by circulating direct current through loops of wire wound around stacks of magnetic steel laminations. These are called field poles, and are mounted on the perimeter of the rotor. The rotor is attached to the turbine shaft, and rotates at a fixed speed. When the rotor turns, it causes the field poles (the electromagnets) to move past the conductors mounted in the stator. This, in turn, causes electricity to flow and a voltage to develop at the generator output terminals."
Specification
| Name | Horizontal 4000kw Hydro Electric Power System |
| Water Head | 230m |
| Runner Diameters | 2.22m |
| Capacity | 4000KW |
| Frequency | 50HZ |
| Generator Voltage | 6300V |
| Layout pattern | Horizontal |
| Material(blades) | Stainless Steel ZG0Cr13Ni4Mo |
| Excitation | Brushless |
| Generator Insulation | F/F |
| Lifespan | 50 years |
Why choose us?
1. More than 20 years of industry experience, install commissioning more than 150 equipment each year
2. Provide complete proposal for hydro power plant from water to wire
3. Abundant foreign power plant project implementation experience such as France, Japan, USA, South Africa, Sri Lanka, Iran, Southeast Asia
4. Design and manufacture of hydro power generator with voltage 400V,6.3KV . capacity exceed 1000kw with 400V
FAQ
1.You are a trading company or a manufacture?
We are a hydro turbine generator manufacture with over 20 years of experiences, Our factory is in the Sichuan you will take 2 hours driving after you reach Shuangliu Airport, pay a visit to our factory you will know more about us.
2.What Kind of water turbine should I choose?
We need to know water head, flow rate, voltage level, frequency, on-grid or off-grid running, automation level from you to work out the solution
3: Can you do the EPC for the hydro power plant?
Yes, We can design, producing and install the equipment, we will dispatch technologist and workers to install the equipment.
